PiControl Solutions
System Identification

Short Educational Video on Transfer Function Identification: Software identification of First-Order Transfer Function parameters

Watch the video → Welcome to the fifth video from PiControl Solutions on practical Industrial System Identification and Process Control as we continue with a series of short, practical, and useful…

Watch the video →

Welcome to the fifth video from PiControl Solutions on practical Industrial System Identification and Process Control as we continue with a series of short, practical, and useful educational videos.

Even though we can visually identify First-Order Transfer Function parameters, we need to understand that it is sometimes not that simple to identify them as accurate and precise enough to be used in real processes, so there is a need for more advanced ways to identify them.

In this video, we will see how simple it is by doing it in the best system identification software PITOPS. We will first use our SIMCET software to simulate a few step tests of the first-order process and then import process data to PITOPS system identification software, as it would be done in the control room.

Make sure to give us a thumbs up and share it if you like it, and don’t forget to subscribe to our channel for more short and practical educational videos in the field of process control.

PiControl multivariable closed-loop system identification software called PITOPS can easily identify zero (integrating), first-order, and second-order transfer function parameters using historical plant data. It is also the only software product that performs truly closed-loop system identification with the secondary (cascade/slave) PID controllers while they are kept in Cascade (Remote) mode. No other competitor tool can do successful transfer function identification using data with PID controllers in Cascade modes. For more info on PITOPS please visit: https://www.picontrolsolutions.com/products/optimization/pitops/

PiControl real-time process control simulation software for training and education called SIMCET can simulate the real-time behavior of all transfer function models, even when they are impacted by large noise and continuous disturbances. For more info on SIMCET please visit: https://www.picontrolsolutions.com/products/simulation/simcet/

For more info, visit: https://www.picontrolsolutions.com

Share
#closed-loop#system-identification#PITOPS
PC

Process Control Engineering

PiControl Solutions

The engineering team behind PITOPS, SUPERTUNE and COLUMBO — 10,000+ PID loops tuned and 50+ MPCs re-stabilized across 200+ industrial facilities since 1998, on-site and remote, worldwide.

Talk to an engineer

See this on your own plant data

30 minutes with a process control engineer. Bring a tough loop or a degrading MPC — we'll show PITOPS, SUPERTUNE, COLUMBO or APROMON on your own closed-loop data when you can share it.

Request a Demo